Eco friendly flooring banner

Premium Combi-Lay timber and laminate Underlay

Premium Combi-Lay


Premium Combi-Lay UnderlayPremium Combi-Lay is a good quality, medium density polyolefin underlay for all floating floor applications. It incorporates a continuous clear damp-proof with 100 mm overlap and integrated ?peel and stick?. The inclusion of a continuous damp proof is a requirement under most floating floor installations. With Premium combi-lay, the need for additional damp proof layers is almost always avoided*, making installations quicker and more cost effective.emium Combi-Lay combines the right balance of compression, slip and damp proof characteristics into one affordable package.

Premium Combi-Lay Benefits

  • Easy to handle - 2 mm thick x 1 m wide
  • Continuous damp proofing in one application*.
  • Integrated Peel and Stick Strip
  • Lay flat polymers for easy installation
  • Will not hold water, and will not mildew
  • Compatible with standards trims
  • Low cost
  • L'nw + C1 = 51. This is a site specific test result and complies with Building Codes of Australia (BCA) multi-story requirements (1st May 2004). Test Report available upon request.
Specification:
  • Thickness supplied: 2 mm
  • Water vapour transmission rate: 4.62 g/m2.24hr
  • Water absorption: 0.007 mg/cm2
  • Compr. Strength at 25 % compression: 30 kPa

Premium Quiet-Step Combi-Lay

Premium Quiet-Step Combi-Lay UnderlayQuiet-Step Combi-Lay is a superior underlay,where reduced foot noise and sound reduction in multi-story buildings are required. It is made of high density polyolefin copolymer resin which effectively reduces the hollow and often "clunky" foot noise associated with floating floors. Quiet-Step Combi-Lay addresses this key negative of floating floor installations, while performing all the tasks of a superior quality underlay including a continuous damp proof*.

Quiet-Step is the first floating floor underlay in Australia to take foot noise seriously. Independent University tests show a 30 % or more reduction in foot noise for the user, while the underlay has achieved an excellent L'nw + C1 = 49. The integrated damp proof removes the need for additional damp proof layers in most instances*, while the products strength and lay flat characteristics make it a pleasure to install.

Quiet-Step Combi-Lay Benefits

  • 30% reduction in foot noise compared to normal underlay
  • Easy to handle
  • Continuous damp proofing in one application*
  • Integrated Peel and Stick Strip
  • Lay flat polymers for easy installation
  • Super tough tear resistance to tools and boots
  • Will not hold water, and will not mildew
  • Compatible with standard trims
  • L'nw + C1 = 49. This is a site specific test result and complies with BCA multi-story requirements.
Specification:
  • Relected Foot Noise - Reduction 30%
  • Thickness supplied:- 2 mm
  • Water vapour transmission rate: 1.7 g/m2.24hr
  • Water absorption: 0.003 mg/cm2
  • Compr. Strength at 25 % compression: 70 kPa
fineline

*Both Premium and Quiet-Step Combi-Lay

Are available without damp proof for those applications where 200 um plastic is to be used or where a damp proof is not deemed necessary. Always seek manufacturer's guidelines. Premium Floors recommends continuous damp proof for all floating floor installations over concrete and wood floors directly above ground. Continuous damp proofing requires taping of roll end joints.Heated floors and knowingly or logically wet floors require separate 200 um plastic barrier with 300 mm overlap and turn up at walls.

fineline

Conclusion:

Quiet-Step provides the best possible combination of reflected and multi-storey noise, even when compared to underlays more than 3 times the price. Quiet-Step combi-lay is designed for use with ReadyFlor products. it provides a continuous damp proof, along with ideal slip and compression characteristics

fineline